The lightest and highest performing splitboard bindings in the world - made with incredible attention to detail and no compromises. Women's Arc Pro splitboard bindings have all of the same great features as our standard Woman's Arc - T1 technology, maximum baseplate cutouts, surfy highback, and lower profile ankle strap - but are sized specifically for women's boots and tuned up premium materials and custom versions. We used carbon reinforced nylon in the highbacks, full PebaxA(R) plastics for the straps, ladders and adjusters, 7075 aluminum in the heel loops allowing us to make them thinner and lighter, 7 custom made screws and hardware pieces, and lastly, we hollowed out the steel pivot pins to shave a few more grams. Shorter and narrower baseplates fit snug and comfortably, accommodating down to a size 5 US (22 Mondo) boot. Lower and more compact heel loops move the ankle strap mounting point down to hit the sweet spot over your boot while positioning the highbacks lower on the leg for a better calf fit. In the Box: Bindings, Tesla touring brackets, T1 heel rests, aluminum mounting screws, and Spark pocket tool. What else do I need? A set of Spark Pucks, Spark Canted Pucks, or Voile pucks. Weight: 1.19 lbs/ea (541g) - 2.39lbs/pr (1082g) - XS/S PebaxA(R) Pillow Line Straps Women's Arc Pro Pillow Line Straps are made with PebaxA(R) plastics, a premium material most often found in high-end ski boots as it provides consistent stiffness and improved toughness in cold temperatures while being 20% lighter. Like our standard pillow line straps, they are ultradurable, comfortable, waterproof, one-piece molded construction, and produced 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride. Women's Arc Pro ankle straps have a smaller footprint than the Women's Surge Pro and feature a flex window for max agility while maintaining support. The toe straps come in one construction for both Arc Pro and Surge Pro models, and are designed to be used as a toe cap but also fit traditionally over the top. Carbon Reinforced Highbacks The Women's Arc Pro Rip 'N' Flip highback is made from carbon reinforced nylon in a ratio designed for medium flex and a surfy feel. This material blend is more responsive, lighter, and stiffer than our standard glass reinforced highbacks. All Rip 'N' Flip highbacks incorporate a tool free forward lean adjuster (FLAD) for complete customization from 0Adeg to 22Adeg in ride mode. The Forward Lean Adjuster toggles easily between forward lean position and -13Adeg touring position for easy transitions. Whammy Bar Climbing Wire A single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes on the steeps. You can switch easily from stowed, to low (12Adeg), to high (18Adeg) and back again while touring. Pro Hardware Weight savings add up by replacing stainless steel hardware with custom-made 7075-T6 aluminum hardware. Aluminum parts are 65% lighter than our standard stainless steel parts and are made with hex drives instead of phillips heads which are less likely to strip. Puck Compatibility Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Spark R&D bindings are designed to work with all puck compatible splitboard models. When used with Arc Pro bindings conveniently access puck screws with the bindings in place for precise stance adjustment. Spark R&D offers a flat and a 3Adeg canted puck model. Snap Ramps, Touring Brackets, & Pivot Pins T1 System bindings slide sideways into the offset Tesla touring bracket and are locked into place with our snap ramp. No pins, no cables, no fiddle factor. Integrated Ibex crampon mounting claws on touring brackets make for quick and easy installation and removal. Pivot pins have been hollowed out and are 33% lighter than standard pins. Buckles & PebaxA(R) Plastics Ladders and adjusters are produced in-house with PebaxA(R) premium thermoplastics which maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests. It's also 20% lighter than our standard material. All straps incorporate Burton's time-tested bomber buckles. T1 Heel Rest The T1 Heel Rest catches the climbing wire in the 12Adeg and 18Adeg positions and is specifically designed to hold the T1 Step Locker in place.
- Brand: Spark
- Category: Equipment / Snowboard Bindings
- UPC: 0812215023954
- SKU: 111432
- MFG ID: 111432
- Color: Black
Skisalot.com
